Convenient functions
VQT3C84
69
You can operate this unit using the TV remote control.
Refer to the operating instructions of the TV about the
buttons that you can use.
∫ Control Panel
Using the Control Panel, you can operate with the TV
remote control.
Select “Control Panel” from the OPTION menu.
§1
This function is available with the TV that supports
“HDAVI Control 3” or later.
§2
This function is available with the TV that supports
“HDAVI Control 2” or later.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December,
2010) for Panasonic HDAVI Control compatible equipment. This
standard is compatible with Panasonic’s conventional HDAVI equipment.
Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ These functions may not work normally depending on the equipment
condition.
About “HDAVI Control” function, read the manual of the connected
equipment (e.g., TV) too.
≥ Use the remote control supplied with this unit if you cannot operate this
unit using buttons on the TV remote control.
≥ The operation of this unit may be interrupted when you press
incompatible buttons on the TV remote control.
Easy control only with VIERA remote
control
§2
Using the OPTION menu
1 Press [OPTION] on the TV
remote control.
2 Select the item, then press
[OK].
Digital TV Menu
Playback Menu
Control Panel
Drive Select
Aspect
FUNCTION MENU
OK
RETURN
DMRPWT500GL_eng.book 69 ページ ２０１１年２月１７日 木曜日 午後１時１７分
To Next Page
Loading...
Need help?
General
