Convenient functions
VQT3C84
76
Changing the unit’s settings
∫ Signal Condition
You can check the quality and strength of signals.
Press [CH WX] to select the channel.
Signal Quality
Signal Strength
≥When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
∫ New Channel Message
Set whether to obtain the information automatically when a
new digital channel is added.
≥ After performing “Update Channel List” or “Manual Tuning” if the channel
number has already been assigned, channel number for the newly tuned
channel will be assigned from 800ch onward.
∫ Settings for Playback
¾ 3D BD-Video Playback
Select the playback method of 3D compatible video
software.
¾ Soundtrack
Select the audio language.
≥If “Original” is selected, the original language of each
disc will be selected.
≥Enter a code with the number buttons when you
select “Other ¢¢¢¢”. (> 85, Language code list)
¾ Subtitles
Select the language for subtitle.
≥If “Automatic” is selected and the language selected
for “Soundtrack” is not available, subtitles of that
language will automatically appear if available on that
disc.
≥Enter a code with the number buttons when you
select “Other ¢¢¢¢”. (> 85, Language code list)
Red bar The signal quality is bad.
Yellow bar The signal quality is poor.
Green bar The signal quality is good.
0 Signal strength is 0%.
10 Signal strength is 100%.
Channel Name
Digital TV Signal Condition
RETURN
Channel Up
Good
Poor
Bad
Channel Down
Signal Strength
Signal Quality
RF Parameter [ ] MHz
Network Name
0108642
HDD / Disc
Setup
HDD / Disc
HDD / Disc
Settings for Playback
Settings for Recording
HDD Management
HDD / Disc
Settings for Playback
Settings for Playback
Subtitles
Menu
Play Video ( AVCHD ) on BD-RE /BD-R
BD-Live
BD-Video Parental Control
DVD-Video Parental Control
3D BD-Video Playback
Soundtrack
DMRPWT500GL_eng.book 76 ページ ２０１１年２月１７日 木曜日 午後１時１７分
To Next Page
Loading...
Need help?
General
