Recording
VQT3C84
35
Press [PROG/CHECK].
To deactivate a timer programme
Select the programme, then press the “Red” button.
≥The timer icon “F” (> right) will change from red to grey.
≥Press the “Red” button again to activate timer recording
standby. (The timer icon “F” will change to red.)
To delete a timer programme
Select the programme, then press [DEL].
To edit a timer programme
1 Select the programme, then press [OK].
2 Change the timer recording options.
(> 33, Timer recording options)
To show programme information
Press [STATUS ].
To exit the timer recording list
Press [EXIT].
≥ Failed programmes are deleted from the timer recording list at 4 a.m.
two days later.
To confirm and edit a timer
programme
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 4/32
Timer Recording
30:30 DRHDD SAT 01.01.2011 08:05 AM
Delete
Info
New Timer Programme
SAT 08.01
SAT 08.01
10:00 AM - 11:50 AM
11:00 AM - 11:45 AM
11:30 AM - 1:00 PM
8:00 AM - 10:45 AM
SAT 08.01
SAT 01.01
DR
HG
DR
DR
OK
OK
Icons
Recording mode (> 8)
Screen icons
F Red: Timer recording standby is activated.
Grey: Timer recording standby is deactivated.
[ Currently recording programme
Part or all of the programme will not be recorded
since the programme is overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The programme did not complete recording because
of some reason.
Auto Renewal Recording is set (> 33).
OK Displayed if the recording can fit in the remaining
space
>
(Date)
Daily or weekly timer programme is set. (up to a
maximum of one month from the present time)
! It may not be possible to record because:
– there is not enough space left.
– the number of possible titles has reached its
maximum. (> 103)
– programmes are deactivated.
DMRPWT500GL_eng.book 35 ページ ２０１１年２月１７日 木曜日 午後１時１７分
To Next Page
Loading...
