Convenient functions
VQT3C84
80
Changing the unit’s settings
∫ On-Screen Information
Select the approximate time until the channel information
screen (> 25) disappears automatically.
∫ Unit’s Display
Changes the brightness of the unit’s display.
≥If “Dim” is selected the display turns dark during play and
disappears when the unit is turned off. It reappears
momentarily if a button is pressed. While using this mode,
the standby power consumption can be reduced.
∫ Screen Saver
This is to prevent burn-in on the screen.
≥If “On” is selected, the masked-off area on the screen
becomes grey.
Depending on the condition of the unit (Connection, Setting)
the masked-off area on the screen becomes grey.
∫ Teletext
Select the Teletext (> 25) display mode.
∫ Blue LED
Set the lighting method for the lamp on the SD card slot.
≥If “SD inserted” is selected, when this unit is turned on and
SD card is inserted, the lamp is lighted.
∫ 3D Settings
¾ 3D Type
If 3D video cannot be played back in 3D, change the
settings as required by the connected TV format.
≥Change the settings for 3D on the TV also when “Side
by side” is selected.
¾ 3D Playback Message
Set to display or hide the 3D viewing warning screen
when playing back the 3D compatible video software.
∫ TV Aspect
Set to match the type of TV connected.
∫ Aspect for 4:3 Video
To play a 4:3 title, set how to show pictures on a 16:9
widescreen TV.
∫ TV System
Set in accordance with the TV System for the connected TV.
Display
Setup
Display
Display
On-Screen Information
Unit’s Display
Screen Saver
Teletext
Blue LED
Connection
≥Pan & Scan
Side picture is trimmed for 16:9 picture.
The pictures may be shown in the
letterbox style depending on the content.
≥Letterbox
Black bands appear for 16:9 picture.
Setup
Connection
Connection
TV Aspect
3D Settings
Aspect for 4:3 Video
TV System
HDMI Connection
Connection
3D Settings
3D Settings
3D Type
3D Playback Message
DMRPWT500GL_eng.book 80 ページ ２０１１年２月１７日 木曜日 午後１時１７分
To Next Page
Loading...
Need help?
General
