Convenient functions
VQT3C84
84
Changing the unit’s settings
¾ Automatic Standby after OTR
If “On” is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing “Automatic Stop” or “Recording Time”
(> 28).
¾ Automatic Standby after Copy
If “On” is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing copy (> 50).
¾ RF OUT ( Aerial Signal )
Set whether to output the aerial signal or not from RF
OUT while in standby mode (when “Power Save in
Standby” is activated).
≥If “On” is selected, the aerial signal is output from this
unit.
∫ Remote Control
Change the remote control code on the main unit and the
remote control if you place other Panasonic products close
together.
≥Use “BD 1”, the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number button
([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
≥Operation is possible only with Panasonic remote controls
with “IR6” printed at the bottom when the remote control
code of this unit is set to “BD 4”, “BD 5” or “BD 6”.
∫ Clock
If the time is not set correctly, use the settings listed in the
method below.
≥Automatic
This unit usually obtains time and date information from
digital broadcasts.
But, if the time is not set correctly, set it to “Off” and
perform “Manual setting”.
≥Region Selection
Select the region where you live to adjust the standard
time.
≥The time contained in the broadcast signal is UTC
(Universal time, coordinated).
≥Daylight Saving Time
Select time offset from the standard time for Summer
Time.
≥If there is a gap between displayed time and actual time,
set this function.
≥Manual setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the settings.
∫ PIN Entry
You can set/change the PIN. (> 74)
IR6
BLU-RAY DISC PLAYER/HDD RECORDER
BLU-RAY DISC PLAYER/HDD RECORDER
IR6
Clock
Time Date
Daylight Saving Time
Region SelectionAutomatic
Please set the clock.
OK: access RETURN: leave
OK
RETURN
12
00
10 AM
NSW / ACT Automatic
On
11
2011
DMRPWT500GL_eng.book 84 ページ ２０１１年２月１７日 木曜日 午後１時１７分
To Next Page
Loading...
Need help?
General
