100
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
Note:
1. Wet Cloth represents a soft cloth saturated with water.
For stubborn toner accumulation, wipe with a soft cloth saturated with Isopropyl Alcohol first, then
follow up with a soft cloth saturated with water.
2. The Maintenance Cycle is based on the Counter Information for each individual module.
To verify the counter information, print the Total Counter List using the Service Mode: F7 - Electronic
Counter - 00 (List Print).
3. Cleaning, Replacement and Adjustment Cycle (Sheet) are based on using Panasonic's recommended
standard paper and supplies. These cycles may vary with the kind of paper used, Paper size,
orientation, print duty, continuous/interval print and/or ambient conditions.
• Total Counter View Mode on the LCD
The Total Counter can be displayed on the Panel Display by pressing "COPY SIZE" and "PAPER TRAY"
keys simultaneously in Standby mode for quick reference.
• LCD Contrast Adjustment
Press holding the “CLEAR” key and press “ORIGINAL SIZE” key for Lighter or “COPY SIZE” key for
Darker.
29 Charge Corona Case 1444 60K - - Refer to
2.2.5.
F7-07
30 Charge Wire 1443 10K
By Customer
- 60K
31 Cleaning Blade 1408 - - 60K
32 Front Cleaning Felt 1410 - - 60K
33 Rear Cleaning Felt 1411 - - 60K
34 Cleaning Sponge 1412 - - 60K
35 Sheet Scoop 1415 - - 60K
Fuser Unit
36 Fuser Roller 1115 60K Alcohol 120K Refer to
2.2.6.
F7-02
37 Pressure Roller 1021 60K Alcohol 240K
38 Fuser Roller Busing 1114 - - 120K
39 Pressure Roller
Busing
1020 - - 240K
40 Thermistor
Assembly
1125 60K Dry soft cloth 120K
41 Fuser Lamp 1116 - - 240K
42 Separator 1109 60K Alcohol 120K
43 Exit 2 Roller 1104 60K - -
Main Unit
44 Ozone Filter 825 - - 240K Refer to
2.2.13.
F7-02
45 Toner Spill Tray 1202 60K - -
No.
Mechanical Parts
Ref.
No.
Cleaning Replacement/Adjustment
Ref.
Counter
Cycle
(Sheet)
Method
Cycle
(Sheet)
Procedure
TOTAL COUNTER
1234
To Next Page
Loading...
