406
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
8.19. Installing the Mechanical Counter (DZTK000002)
(Supplied as a Service Part)
8.19.1. Installation
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
(1) Open the Left Cover.
(2) Open the Front Cover.
(3) Remove the Toner Waste Container.
(4) Remove the Toner Bottle.
Caution:
Do Not install the Toner Bottle before installing
the Process Unit first. If the Toner Bottle is installed
and turned to the "Locked" position without the
Process Unit, the Toner will spill inside the
machine.
To Next Page
Loading...
