Panasonic DP-1820P

56
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
2.2.4. Scanner Unit
(1) Remove the Control Panel Assembly.
(Refer to 2.2.3.)
(2) Remove 4 Shoulder Silver Screws (X2).
(3) Remove the Rear Document Plate (107).
(4) Remove the Platen (L) Glass (106).
(5) Holding by the center, slowly move the Lamp
Base Assembly to the center of the Scanner
Base Frame in the direction shown by the arrow.
(6) Release the Harness.
(7) Release the Latch Hook.
(8) Disconnect 2 Harnesses on the Inverter PC
Board (CN1 and CN2).
(9) Remove the Inverter PC Board (416).