Panasonic DP-1820P

365
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
8.13. Installing the Inverting Automatic Document Feeder (DA-AR202)
for DP-1820E
8.13.1. Contents
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.13.2. Installation
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
Qty. Description Part No. Remarks
1
Inverting Automatic Document Feeder
(i-ADF)
See Note For DP-1820E
1 Scanning Pad DZJM000428
2 Hinge Stopper DZJA000726
2 Hinge Cover DZMC000713
2 Hinge Cover 2 DZMA004372 From July 2004 Production
2 ADF Mounting Bracket DZJA000730
1 i-ADF OPS Actuator DZJM001007
1 i-ADF Rear Support Bracket DZJD000035 Not Used
9 Screw XTB3+8J
4 Screws will not be used
8 Screw XTB3+12J
2 Silver Screw XSN4+W10FN
2 Thumb Screw DZPA000064
1 Installation Instructions DZSM000551 This Document
(1) Using a Slotted Blade Screwdriver, remove the
OPS Actuator as illustrated.
Note:
Release the latch on the left side of the actuator
with the Slotted Blade Screwdriver.