Panasonic DP-1820P

339
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
8.6. Installing the Fax Communication Board (DA-FG180)
for DP-1820P/1820E
8.6.1. Contents
Note:
1. Verify the Firmware version of your machine first. In order to support the Internet Fax/Email
functions, the Firmware version must be V1.xx or higher, and if required, it is important that
you update it when instructed to do so in the Installation Instructions.
2. If also installing the Program Expansion Board (DA-EM600), it must be installed first.
3. The part number(s) may differ depending on the Destination.
4. Refer to the Parts List in the Parts Manual.
Qty. Description Part No. Remarks
1 FXB PC Board See Note
1 MJR PC Board Assembly See Note
1 MJR Harness DZFP001630
1 Key Assembly See Note
1 Speaker DZHP010070
1 Speaker Spring DZKP000365
1 Telephone Line Cable See Note
1 TEL Label DZNK005454
1 Line Label DZNK005455
1 Type Approval Label ----- Specified Destination
1 Telepermit Label ----- For New Zealand only
1Stamp Assembly
DZHP000237 For USA/Canada only
DZHP000240 Other Destinations
1 Stamp Unit See Note For ADF
2 Clamp DZJK000023
1 PCB Spacer DZJH000063
4 Screw XTW3+6LFJR
2 Screw XTB3+8GFJ
1 Quick Guide See Note
For Facsimile and Internet FAX/Email
1 Operating Instructions CD See Note
1 Firmware CD See Note
1 Installation Instructions DZSM000813 This document