Panasonic DP-1820P

386
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
8.16. Installing the Platen Cover (DA-UC200) for PU
8.16.1. Contents
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.16.2. Installation
Qty. Description Part No. Remarks
1 Platen Cover DZMA002394
1 Scanning Pad DZJM000428
2 Platen Hinge DZMH000013
4 Screw XTB3+12JFJ
1 Installation Instructions DZSM000303 This document
(1) Install 2 Platen Hinges.
(2) Secure the Platen Hinges with 2 Screws each.
(3) Install the Platen Cover.
(4) Place the Scanning Pad on the glass aligning it
with the upper left corner.
(5) Peel off 6 adhesive strip protectors from the
Scanning Pad.
(6) Close the Platen Cover.
Note:
Reopen the Platen Cover and push the
Scanning Pad gently to glue it properly.
(1)
(1)
(2)
(2)
(3)
(5) x6
(4)