372
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
8.14. Installing the Automatic Document Feeder (DA-AS181)
8.14.1. Contents
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.14.2. Installation
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
Qty. Description Part No. Remarks
1 Automatic Document Feeder (ADF) See Note
2 Angle Plate DZJA000858
1 Scanning Pad DZHP006374
2 Screw DZPB000007
4 Screw XTB3+12J
1 Installation Instructions DZSM000523 This Document
(1) Install the Automatic Document Feeder into
the 2 Mounting Holes.
(2) Secure the ADF with 4 Screws (XTB3+12J).
(3) Remove 10 Screws.
(4) Remove the Rear Cover.
To Next Page
Loading...
