63
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(12) Turn the OPC Drum Assembly in the direction
of the arrow and remove.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
Caution:
The OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight or bright light.
Even if it is a fluorescent lamp, approx.1000 lm/m
2
(1000 lx).
(13) Release 3 Latch Hooks and remove the
Developer Cover.
(14) Remove the Support Pipe (1338).
<Removing the Old Developer and Toner>
(15) Hold the Developer Unit as illustrated over a
suitable container and dump the used Developer
and Toner by rotating the Gear.
(16) Clean the Developer Unit with a soft dry cloth.
To Next Page
Loading...
