Panasonic DP-1820P

163
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
4.6.4. Technician Warning
The following message will be displayed in the event.
E13: Out of Toner
Code Function Possible Cause(s)
E13 No Toner Detection 1. Out of Toner.
2. Toner Bottle not installed.
3. Toner Bottle not installed correctly.
4. Toner Sensor disconnected.
5. Toner Sensor defective.
6. SPC PCB connector disconnected.
7. SPC PCB defective.
LCD Message Possible Cause(s)
HDD OPTION REQURIES
ADDITIONAL SORT MEM
1. Additional Sort memory is not installed.
• DA-SM16 (16 MB)
• DA-SM64 (64 MB)
• DA-SM28 (128 MB)
2. Make sure the SDRM PC Board was installed properly.
MACHINE ID ERROR
1. Incorrect SC PCB is installed.
• SC PCB for DP-1520P
• SC PCB for DP-1820P
• SC PCB for DP-1820E
2. SPC PCB defective.