353
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
8.8. Installing the Hard Disk Drive Unit (DA-HD18)
8.8.1. Contents
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.8.2. Installation
1. Before installing the Hard Disk Drive Unit, make sure the optional Sorting Image Memory is
installed in the memory socket on the SC PC Board first. At least an additional 16 MB
(DA-SM16B) of Sorting Image Memory is required.
Refer to the Installation Instruction of the Sorting Image Memory (DA-SM16B/64B/28B).
2. Install the Hard Disk Drive Unit by following the steps below.
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
Qty. Description Part No. Remarks
1 Hard Disk Drive (HDD) See Note
1 DC PCB DZEC102176
1 HDD Cover DZJE001207
1 HD Harness DZFP001651
1 HDD2 Harness DZFP001633
1 DC12 Harness DZFP001632
2 Harness Clamp (Small) DZJK000004 Black
4 Harness Clamp (Medium) DZJK000068 White
4 Black Screw See Note
6 Screw See Note
1 Installation Instructions DZSM000812 This document
(1) Remove 10 Screws.
(2) Remove the Rear Cover.