Panasonic DP-1820P

320
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
7.3.2. Setting the Default Destination (For Europe and Other Destinations only)
1. Press “V” or ”/\” arrow keys to select the desired destination.
2. Press the "SET" key.
3. Press the "1" key for YES.
After the machine has warmed up, it displays:
4. Turn the Power Switch on the Right side of the machine to the OFF and back to the ON position.
(31) Install the Toner Waste Container.
(32) Close the Front and the Left Covers.
(33) Load paper into the Paper Tray.
Caution:
Ensure that all filament tapes and packing
materials are removed.
(34) Plug the AC Power Cord and turn the Power
Switch on the Right Side of the machine to the
ON position.
Note:
Perform the following adjustments after the
machine has warmed up and displays:
<For USA and Canada> (Skip to Sect. 7.3.3.)
<For Europe and Other Destinations only>
Note:
The (**) *** in the LCD display above may differ
depending on the destination.
READY TO COPY
COPIES:00
1
DP-1820E (**) ***
DESTINATION CODE :
PRESS \/ /\ TO SELECT
READY TO COPY
COPIES:00
1