Panasonic DP-1820P

190
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
5.1.4. F5 Mode: Function Parameters (For Copier)
Set the machine to Service Mode and press "5" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F5 Mode
No. Item Function Default Setting
00 Not Used
01 Frequency Desired 0 : Auto
1 : 50 Hz
2 : 60Hz
2 (for USA / Canada)
1 (for Europe)
02 Not Used
03 LSU Startup Speed 0 : Low
1 : Full
1
04 LSU Off Timer 1 : 5 sec.
2 : 10 sec.
3 : 15 sec.
4 : 20 sec.
6 : 30 sec.
8 : 40 sec.
10 : 50 sec.
12 : 60 sec.
3
05-08 Not Used
09 Fuser Lamp Control 0 : Off
1 : Auto
0 (for USA / Canada)
1 (for Europe)
10 Exit Tray Limitation
(Up to 250 Sheets)
0 : None
1 : Accumulate
2 : Job
0
(Effective from August
2004 Production)
11 Replace Drum 0 : Off
1 : On
0
(Effective from August
2004 Production)
Replace Drum
(Except USA / Canada)
0 : Off
1 : User (Displays Replace Drum)
2 : Service (Enables Check & Call
function)
0
(Effective from Oct.
2004 Production)