315
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
7.3. Installation Procedure
Note:
1. Refer to each individual Installation Instructions when installing other Options.
2. The following machine illustrations, depict a DP-1820E with a standard configuration.
3. The scanner is held in place by a Shipping Blue Screw to prevent damage during transit.
Do Not turn the Power Switch ON before unlocking the scanner.
4. The machine is shipped from the factory with the Pressure Roller locked in the opened position to
avoid the possibility of damaging the Pressure Roller.
Do Not turn the Power Switch ON before unlocking the Pressure Roller.
7.3.1. Installation Procedure
<Unlocking the Scanner>
(1) Remove the Protection Strip from the Battery.
(2) Remove the Tape.
(3) Remove 1 Blue Screw.
(4) Store the Blue Screw into the space provided in
the 1st Paper Tray.
<Unlocking the Pressure Roller>
(5) Open the Left Cover.
(6) Remove 2 Tapes.
(7) Remove 2 Blue Screws.
To Next Page
Loading...
