Panasonic DP-1820P - Page 366

366
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(2) Install the i-ADF OPS Actuator.
(3) Install 2 ADF Mounting Brackets.
(4) Secure 2 ADF Mounting Brackets with 8 Screws.
(XTB3+12J)
(5) Install 2 Thumb Screws (DZPA000064).
(One for each ADF Mounting Bracket)
Note:
When installing the Thumb Screws, do NOT
tighten them. Leave a clearance of approx. 6-8
mm, as illustrated.
(6) Install the i-ADF onto the ADF Mounting
Brackets.
Note:
a. Set the i-ADF in the direction of the arrow.
b. Align the hallmark on the Right Side of the
Hinge Base and the ADF Mounting Bracket as
illustrated.
(7) Tighten 2 Thumb Screws (DZPA000064).
(8) Install 2 Hinge Cover 2. (From July 2004
Production)
(9) Secure the Automatic Document Feeder with 2
Silver Screws (XSN4+W10FN).
(10) Install 1 Screw (XTB3+8J) on the back of the left
ADF Mounting Bracket from the bottom as
illustrated.