Panasonic DP-1820P

405
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(58) Remove the Dummy Plug.
(59) Install 1 Clamp (DZJK000023) and 1 Edge
Saddle.
(60) Route the PTC-AC Harness 4 through the hole
in the frame as illustrated.
(61) Connect the PTC-AC Harness 4.
(62) Secure the PTC-AC Harness 4 with the Harness
Clamp and Edge Saddle.
(63) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(64) Plug the AC Power Cord and turn the Power
Switch on the Right Side of the machine to the
ON position.
(65) Reconnect the Telephone Line Cable if it was
disconnected.