317
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(13) Release 3 Latch Hooks and remove the
Developer Cover.
(14) Shake the Developer Bottle thoroughly (approx.
30 seconds).
(15) Pour the developer evenly into the developer unit
by turning the Black Gear as illustrated. Make
sure to empty the bottle.
(16) Close the Developer Cover and ensure that 5
Latch Hooks are hooked firmly.
Note:
When closing the Developer Cover, ensure that
the Developer Dispersion Sheet is on the outside.
(17) Reinstall the OPC Drum Assembly.
(18) Reattach 2 Springs.
(19) Reconnect the Harness.
To Next Page
Loading...
