330
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(4) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(5) Plug the AC Power Cord and turn the Power
Switch on the Right Side of the machine to the
ON position.
(6) Reconnect the Telephone Line Cable if it was
disconnected.
(7) Update the firmware of the unit to the PCL
Option firmware. Refer to section 8.1 Service
Notes of this manual.
(8) Install the PCL6 Software into the PC with the
Operating Instructions by following the prompts
of the Installation Wizard.
To Next Page
Loading...
