343
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(26) Install 2 Clamps.
(27) Install the PCB Spacer.
(28) Plug the FXB PC Board into the SC PC Board
with on Board Connector (CN80).
(29) Secure the FXB PC Board with 2 Screws
(XTW3+6LFJR).
(30) Secure the MJR Harness with the Harness
Clamps.
(31) Connect the MJR Harnesses to the DX PC
Board (CN391, CN392 and CN393).
(32) Attach the Type Approval Label (specified
destination) to the Rear Cover as illustrated.
Note: (For New Zealand only)
Attach the Type Approval Label and Telepermit
Label to the Right Side Cover as illustrated.
To Next Page
Loading...
