351
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(14) Route the Keyboard Harness through the
access hole on the machine.
(15) Install the Keyboard Unit as illustrated.
(16) Secure the Keyboard Unit with 4 Screws.
(17) Connect the Keyboard Harness to CN234 and
Panel Harness to CN220 on the PNL1 PC
Board.
(18) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(19) Plug the AC Power Cord and turn the Power
Switch on the Right Side of the machine to the
ON position.
(20) Reconnect the Telephone Line Cable if it was
disconnected.
To Next Page
Loading...
