357
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(23) Install 2 Harness Clamps (Small) and 3
Harness Clamps (Medium).
(24) Connect the HDD2 Harness to the HDD.
(25) Connect the HDD2 Harness to CN143 and
DC12 Harness to CN141 & CN142.
(26) Secure the HDD2 Harness with the 2 Harness
Clamps.
(27) Connect one end of the HD Harness to the HDD.
See Note below.
(28) Secure the HD Harness and DC12 Harness
with the Harness Clamps.
Note:
Make sure that the HD Harness is connected to
the HDD correctly as illustrated.
1) The Key on the connector must be facing
Upwards.
2) Either connector of the HD Harness will fit into
the HDD. However, the correct one is shown
in the illustration (Harness comes out from the
top of the connector).
HDD
Correct
Incorrect
HDD
Key
Key
To Next Page
Loading...
