375
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(21) Remove the ADF Front Cover.
(22) Remove 1 Screw and turn the Adjusting
Bracket counter-clockwise.
(23) If the Copy Image is Skewed to the right, set the
Adjusting Bracket to the right and secure it with 1
Screw.
(24) If the Copy Image is Skewed to the left, set the
Adjusting Bracket to the left and secure it with 1
Screw.
(25) Perform Service Mode F6 (No. 90, 91, 92 and
93) to adjust the ADF Scanning Position.
Copy Image
Leading Edge
<Example of Printed Image>
Right
Skewed to
the right
<Example of Printed Image>
Left
Copy Image
Leading Edge
Skewed to
the left
To Next Page
Loading...
