383
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
Caution:
Ensure that the Black Wire is on the Left Side,
and that it connects to Pin 1 of the female
connector as illustrated.
Inserting the connector upside-down, may damage
the machine's SPC or CST PC Board.
(27) Route the 3rd Paper Tray Unit's Harness through
the access hole at the bottom of the 2nd Paper
Tray Unit as illustrated
(28) Connect the Harness of the 3rd Paper Tray Unit
to CN772 on the CST2 PC Board of the 2nd
Paper Tray Unit.
(29) Secure the Harness with the Edge Saddle.
(30) Remove 10 Screws.
(31) Remove the Rear Cover.
(32) Remove 3 Screws.
(33) Remove 2 Brackets.
To Next Page
Loading...
