388
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
8.17.2. Installation
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
(1) Remove 10 Screws.
(2) Remove the Rear Cover.
(3) Open the Left Cover.
(4) Remove 2 Silver Screws.
(5) Remove the Left Scanner Cover.
(6) Remove 2 Shoulder Silver Screws.
(7) Remove the Right Scanner Cover.
(8) Remove 2 Silver Screws.
(9) Slightly lift the Control Panel Assembly.
(10) Disconnect the Harness on the PNL1 PC Board
(CN220).
(11) Remove the Control Panel Assembly.
(12) Remove 9 Screws.
(13) Remove the Rear Platen Cover and Left Platen
Cover.
(14) Remove the Platen (L) Glass and Scanning (S)
Glass.
To Next Page
Loading...
