Panasonic DP-1820P

397
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(81) Connect the PTC-AC Harness 2 to PTC-AC
Harness 1.
(82) Secure the PTC-AC Harness 2 with the Harness
Clamp.
(83) Secure the PTC-AC Harness 2 with the Harness
Bracket.
(84) Install the Dehumidifier Heater Assembly.
(85) Secure the Dehumidifier Heater Assembly with
1 Screw.
(86) Connect the PTC-AC Harness 2 to the
Dehumidifier Heater Assembly.
(87) Connect the Harness to Heater Switch Assembly
as illustrated.
(88) Install the Heater Switch Assembly.
(89) Secure the Heater Switch Assembly with 2
Screw.
(90) Cut the Protective Tab on the Right Cover.
(91) Attach the Heater Main Label and Switch Label
to the Right Cover as illustrated.
Note:
Use the Heater Main Label to the desired
language.
(92) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(93) Plug the AC Power Cord and turn the Power
Switch on the Right Side of the machine to the
ON position.
(94) Reconnect the Telephone Line Cable if it was
disconnected.