Panasonic DP-1820P

47
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
Note:
When reinstalling the ADF Rear Cover (1701),
make sure to properly route the ADF Harness as
illustrated.
(17) Remove 1 Screw (19).
(18) Remove the ADF PC Board Cover (1916).
(19) Release the Clamp from ADF Unit.
Note:
Do not cut the Tie-Wrap. Push the release clip on
the side of the clamp to remove it.
(20) Disconnect the ADF Harness (2827) on the ADF
PC Board (CN21).
(21) Remove 2 Silver Screws (B1).
(22) Remove 2 Angle Plate (1801).