50
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
<Turn the ADF upside down>
(41) Detach the Hook and Loop Fastener on the left
side of the Scanning Pad (1822).
(42) Remove 1 Screw (19).
(43) Remove the Exit 1 Roller (1812) and P6L8
Bushing (1813).
<Return the ADF to its upright position>
(44) Release 2 Latch Hooks.
(45) Remove the ADF Front Cover (1702).
(46) Release the Harnesses (2849, 2851) from the
Clamp.
(47) Remove 5 Screws (19).
(48) Remove the Original Tray.
(49) Remove the Timing Actuator (2004).
To Next Page
Loading...
