77
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
(16) Release the Harnesses from 2 Harness
Clamps.
(17) Disconnect the Harness on the CST2 PC Board
(CN774).
(18) Remove 2 Screws (Y3).
(19) Remove the Lift Up Motor (3132).
(20) Release the Harnesses from 2 Harness
Clamps.
(21) Disconnect the Harness on the CST2 PC Board
(CN774).
(22) Remove 2 Screws (Y3).
(23) Remove the Lift Up Motor (3132).