Panasonic DP-8032

132
DP-8032/8025
2008Ver.1.2
4.4. Document Feeder (ADF)
4.4.1. No Document Feed
Is the Document set
properly?
Adjust, or replace the
Actuator.
Is the Document
thickness, or size
within specifications?
Does the LCD activate
when a Doument is set?
Check the Harness of
the ADF Motor.
Does the ADF Roller
rotate?
Clean the Feed Roller
surface.
Is the Feed Roller
surface dirty?
Replace the Pre-Feed
and / or the ADF Roller.
Replace the Clutch
or the ADF Motor.
Set the Document
properly.
Set the Document on
the Platen Glass.
Does the NP Sensor
Actuator move
smoothly?
Check the connections
of CN21 on the ADF
PCB, and CN605
on the SC PCB.
Is the trouble
resolved?
Is the trouble
resolved?
Is the trouble
resolved?
Replace the ADF
PCB, or the SC PCB.
Replace the ADF PCB.
Check, and adjust the
separator pressure.
No
No
No
No
No
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
No
No
No
Does CN27, pin 3 on
the ADF PCB
measure +5 VDC?
No
No
START
END
END
END