354
DP-8032/8025
2008Ver. 1.2
11.2. Maintenance and Inspection
11.2.1. Periodic Part Replacement
The unit does not have components that require periodical replacement.
11.2.2. Consumables and Durables
Some components may require replacement due to wear, deterioration or damage. Replace them as
required.
11.2.2.1. Finisher Unit
11.2.2.2. Scheduled Maintenance
11.2.3. Disassembly and Assembly
No. Part Name Part No. Q’ty Expected Life Remarks
1 Stapler GH03-7811 1 200,000 operations
A single cartridge
contains 3,000 staples.
Item Interval Description Remarks
Feeding Assembly Roller
Shortest cleaning interval of the
Host machine
Cleaning
Wipe with clean cloth
moistened in water.
Feeding Assembly Member
Paper Path Guide
Transmission Type Sensor Wipe with a dry cloth.
<Removing Finisher Cover Assembly>
(1) Open and hold the Finisher Cover (2608).
(2) Release the Front and Rear Arms (2609 and 2610).
(3) Release the Rear Latch and remove the Finisher
Cover (2608).
(4) Remove 1 Screw (2633).
(5) Remove the Front Cover Assembly (2601).
Note:
When reinstalling the Cover, make sure 1 Latch Hook
is in the hole and the Release Lever works correctly.
To Next Page
Loading...
