Panasonic DP-8032

279
DP-8032/8025
2008Ver. 1.2
8.7. Installing the Expansion F-ROM Board (DA-EM600)
8.7.1. Contents
Visually check the condition and contents of the box for completeness, or for any shipping damage before
starting with the installation.
Remove all Tapes, and the packing materials used to secure the Units during shipment.
After unpacking the product, dispose of the packing materials appropriately.
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories in details.
8.7.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
No. Qty. Description Remarks
1 1 Expansion F-ROM Board
2 2 PC Board Support
3 1 Installation Instructions This document
(1) Remove 4 Silver Screws.
(2) Open the Rear Cover.
Caution:
If the LEDs on the SC and SPC PC Boards are lit
(ON), the Power to the machine is still ON.
Please read “8.7.2. Installation : CAUTION!” once
again.
3
1 2