311
DP-8032/8025
2008Ver. 1.2
8.19. Installing the Key Counter Harness Kit (DA-KH200)
8.19.1. Contents
Visually check the condition and contents of the box for completeness, or for any shipping damage before
starting with the installation.
Remove all Tapes, and the packing materials used to secure the Units during shipment.
After unpacking the product, dispose of the packing materials appropriately.
Note:
The Key Counter is sold separately.
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories in details.
8.19.2. Installation
Caution:
The DP-8032 series has been described as an example of the representative.
Refer to each service manual for other models.
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the machine
to the OFF position, and then unplug the AC Power Cord before beginning installation.
No. Qty. Description Remarks
1 1 KEY Harness Longer
2 1 KC Harness Shorter
3 1 KC Bracket
4 1 Key Counter Cover
5 2 Screw (M3 x 35)
6 1 Installation Instructions This document
(1) Remove 4 Screws.
(2) Open the Rear Cover.
1 2 3 4 5 6
To Next Page
Loading...
