Panasonic DP-8032

260
DP-8032/8025
2008Ver.1.2
8.2. Installing the Printer Controller Module for PCL6 (DA-PC302)
8.2.1. Contents
Visually check the condition and contents of the box for completeness, or for any shipping damage before
starting the installation.
Remove all tapes, and the packing materials used to secure the units during shipment.
After unpacking, dispose the packing materials appropriately.
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories detail.
8.2.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Caution:
Before installing this option, make sure the Program Expansion Board (DA-EM600) is installed into
Slot 1 on the SC PC Board (CN62) first. Refer to the Installation Instructions of the Program
Expansion Board (DA-EM600).
No. Qty. Description Remarks
1 1 Hardware Key PCL KEY
2 1 Software CD Includes Operating Instructions
3 2 Locking Spacer For Europe Only
4 1 FRM8 PCB ASSY For Europe Only
5 1 Installation Instructions DA-EM600 : For Europe Only
6 1 Installation Instructions This document
(1) Remove 4 Silver Screws.
(2) Open the Rear Cover.
1 2 3 4 5 6