Panasonic DP-8032 - 8.23. Replacing the Laser Unit (LSU)

337
DP-8032/8025
2008Ver. 1.2
8.23. Replacing the Laser Unit (LSU)
(1) Open the Right Cover.
(2) Open the Front Cover.
(3) Remove the Toner Waste Container.
(4) Remove 1 Screw.
(5) Remove the Connector Cover (Clear Blue).
(6) Disconnect the Harness.
(7) Loosen 1 Screw.
(8) Slide the Process Unit out.
Caution:
To prevent damage to the Process Unit, ensure the
Right Cover is still open before pulling the Process
Unit out.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
Caution:
The OPC Drum is sensitive to light. To prevent optical
exposure problems, do not expose the OPC Drum to
direct sunlight or bright light (even if it is a 1000-Lux
fluorescent lamp).