Local Firmware Update Tool (Parallel/USB Port)
Page 7
3. Preparing the Firmware Update
3.1 Preparing the Unit to Accept the Firmware Code
Please refer to the Service Manual for instructions to set the unit to Firmware Update Mode (Service
Mode).
3.2 Preparing the Firmware Code
Copy the firmware Code file(s) to the following folder:
C:\Panasonic\Panasonic-FUP\Data
Note: An Archive File (i.e. DP-2310_PU_030327.exe) extracts the Firmware Code Files automatically
into the designated folder without needing to paste the file into the folder manually. In this case
the file may be downloaded to the desktop or to any other easily accessible location on the hard
disk drive.
To Next Page
Loading...
