Panasonic DP-8032

40
DP-8032/8025
2008Ver. 1.2
2.2. Disassembly Instructions
2.2.1. Inverting-Automatic Document Feeder (i-ADF) Unit
(1) Open the ADF Cover (1831).
(2) Remove 4 Silver Screws (B1).
(3) Lift the ADF Input Tray (1604).
(4) Slightly pull the right edge of the ADF Rear Cover
upward.
(5) Release the Latch Hooks.
(6) Remove the ADF Rear Cover (1601).
(7) Lower the ADF Input Tray back in place.
(8) Disconnect the AMT Harness (1951) from the Clutch.
(9) Remove the Snap Ring (S9).
(10) Remove the ADF Roller (1728) Assembly.
Caution:
When reinstalling, make sure that the Harness is
secured with the Clamp to prevent nipping the
Harness.
(11) Remove the Snap Ring (S9).
(12) Remove the Clutch (1788).
(13) Remove the Bushing (1621).
(14) Remove the Rear ADF Guide (1725).