Panasonic DP-8032 - 8.18. Installing Platen Cover (DA-UC200)

310
DP-8032/8025
2008Ver.1.2
8.18. Installing the Platen Cover (DA-UC200)
< For EU and Other Destinations >
8.18.1. Contents
8.18.2. Installation
Qty. Description Remarks
1Platen Cover
1 Scanning Pad
2 Platen Hinge
4Screw
1 Installation Instructions This document
(1) Install the 2 Platen Hinges.
(2) Secure the Platen Hinges with 2 Screws each.
(3) Install the Platen Cover.
(4) Place the Scanning Pad on the glass aligning on the
upper left corner.
(5) Peel off the 6 adhesive protectors from the Scanning
Pad.
(6) Close the Platen Cover.
Note:
Reopen the Platen Cover and push the Scanning Pad
gently to paste it properly.
(1)
(1)
(2)
(2)
(3)
(5)x6
(4)