Panasonic DP-8032 - 11. Finisher Option (DA-FS300); 11.1. General Description

351
DP-8032/8025
2008Ver. 1.2
11 Finisher Option (DA-FS300)
11.1. General Description
11.1.1. Features
1. Compact and light weight
2. Sorting and stapling by shift-sort
Sheet Stacking, matching, offset stacking, and stapling are performed on a Halfway-processing Tray.
3. Stack Tray loading
The Stack Tray is capable of holding approximately 500 small-sized sheets, or 250 large-sized sheets.
11.1.2. Specifications
Item Description Remarks
Stacking 1 location
Delivery Tray (descending type; 1 tray)
Face-down
Feed Reference Center reference
Stacking Paper Size A3, A4, A4-R, A5, B4, B5, B5-R, LDR, LGL, LTR, LTR-R, FLS
Paper Weight
17 - 24 lb (64 - 90 g/m
2
)
Mode Non-Sort stack / Sort stack / Staple stack
Stack Height Non-Sort
Small-size : 500 sheets : A4, A4-R, A5, B5, B5-R,LTR, LTR-R
Large-size : 250 sheets : A3, B4, LDR, LGL, FLS
Shift-Sort
Small-size : 500 sheets : A4, A4-R, B5, B5-R, LTR, LTR-R
Large-size : 250 sheets : A3, B4, LDR, LGL, FLS
Staple
Small-size : 10- 30 sheets; 45-16 sets / 2-9 sheets; 70-50 sets
: A4, A4-R, B5, B5-R, LTR, LTR-R
Large-size : 10- 20 sheets; 25-12 sets / 2-9 sheets; 70-28 sets
: A3, B4, LDR, LGL, FLS
Note 1, 2
Paper Detection No
Control Panel No
Display No
Size (W x D x H) 7.17 x 19.61 x 10.12 in (182 x 498 x 257 mm) Excluding the
installation kit
Weight Approx. 22 lb (10 kg)
Power Supply 24 VDC from Host machine
Maximum Power
Consumption
Less than 48 W
Stapling Rotary cam type
Stapling Position Rear 1-Point stapling
Refer to the illustration as follows.
Stapling Thickness Small-size : 30 sheets : A4, A4-R, B5, B5-R, LTR, LTR-R
Large-size : 20 sheets : A4, A4-R, B5, B5-R, LTR, LTR-R
Staple Supply Cartridge of Staples (3,000/Cartridge)
Replacement Staples FQ-SS32
Staple Detection Yes
Stapling Size A3, A4, A4-R, B4, B5, LDR, LGL, LTR, LTR-R, FLS
Manual Stapling None