Panasonic DP-8032 - Sheet Bypass

72
DP-8032/8025
2008Ver. 1.2
2.2.8. Sheet Bypass
(16) Remove the BTR Gear (1234).
(17) Remove the Bias Transfer Roller (1221).
<Cleaning Bias Transfer Roller>
Clean the surface of the Bias Transfer Roller only with a
soft dry cloth.
Caution:
When reinstalling the Right Cover, make sure the
Harness is not nipped by the Cover.
(1) Remove 1 Screw (19).
(2) Remove 1 Screw (1Y).
(3) Remove the Snap Ring (S9).
(4) Remove the P6L5 Conductive Bushing (972).
(5) Remove the Dual-Path Guide (1203).
(6) Remove 1 Screw (19).
(7) Remove the Feed Roller (1244).
<Cleaning Feed Roller>
Clean the surface of the Feed Roller with a soft cloth,
saturated with isopropyl alcohol.
(8) Remove the Pressure Plate (1295).