47
DP-8032/8025
2008Ver. 1.2
2.2.3. Scanner Unit
(28) Remove the Touch Panel (127).
(1) Remove the Left and Right Platen Covers (514,
516) and the Control Panel Assembly.
(Refer to 2.2.2.)
(2) Remove 2 Screws (19).
(3) Remove the Glass Assembly (557).
(4) Remove the Glass S (559).
(5) Holding by the center, slowly move the Lamp Base
Assembly to the center of the Scanner Base Frame
in the direction shown by the arrow.
To Next Page
Loading...
