Panasonic DP-8032 - Page 161

161
DP-8032/8025
2008Ver. 1.2
730 RCV LAN Unable to program the Internet
parameters or the autodialer via
Email from a PC.
Verify that the Fax Parameter #158 is
set to Valid.
731 RCV LAN Dialer full while Relayed
Transmission Request was
received.
Dial buffer for manual number dialing
(70 stations) is being used.
741 XMT, Polling PSTN Unable to dial Deleted the registered station name
before dialing with Timer Controlled
Communications, etc.
742 XMT LAN Unable to dial to Key Operator
(Job Tracking, NYSE)
Incorrect setting or wrong number set.
800 Relay
Comm.
PSTN The machine was requested to
relay a document but has no Relay
Hub capability.
814 Conf. XMT
Conf. Polling
Relay
Comm.
PSTN The remote station does not have
Relay XMT nor Confidential
Communication capability.
815 Conf. RCV PSTN Mailbox full.
816 Conf. Polled PSTN The received Polling Password did
not match.
825 Conf. RCV
Conf. Polled
PSTN Parameter settings of the remote
station are not properly set.
850 Relay
Comm.
- Relay Communication is rejected. The dept. code of the Fax Driver/
Panafax Desktop is mismatched with
the registered code in the machine.
870 MEM XMT
Multi-Copy
PSTN
LAN
Memory overflow occurred while
storing documents into memory.
879 Memory
RCV
PSTN Memory overflow occurred during
substitute memory reception.
Memory overflow on the Fax side.
LAN Memory overflow.
Mail Server sent a reset command
while downloading the data to the
machine.
Memory overflow on the Fax side.
Mail server aborted the download
(Busy with other higher priority jobs).
880 - - File Access Error.
884 - - File Access Error.
961 RCV LAN Memory file access error. SC PCB defective.
962 XMT PSTN Memory file access error. SC PCB defective.
LAN Memory file access error. SC PCB defective.
Fax Information Codes
Code Mode Phase Description of Problem Possible Cause(s)