Panasonic DP-8032 - Page 170

170
DP-8032/8025
2008Ver.1.2
4.9.4. Error Message Appears on the Unit
4.9.5. System Error (CD Drive Related Error During Installation)
Error Message
Cannot complete print job;
Image memory overflow
• There may not be enough Sort Memory available in the Panasonic
Device to complete the print job.
Either install an optional Sort Memory, or change the resolution to 300
dpi in the Printer Driver Properties dialog box.
Cannot complete print job;
Confirm print condition
• The print settings may not be matched for the system.
Change the printing settings in the Printer Driver Properties dialog
box.
Ex: Multi-sized printing.
Cannot print;
System error
• Change the resolution to 300 dpi in the Printer Driver properties
dialog box.
Problem Possible Solution(s)
Cannot read the drive. • Insert the CD into the drive, and click “Retry”.