Panasonic DP-8032 - Page 176

176
DP-8032/8025
2008Ver.1.2
004 Fuser Unit Paper Exit Sensor Paper is detected. 0 (1045) Fig.10 G4
Dual-Path Exit Guide Unit
Detection Sensor
Unit is connected. 0
---
ADU Detection Sensor Unit is connected. 0 ---
JAM Access Cover Open
Detection Sensor
(2nd Paper Feed Module)
Cover is open. 0 (1045) Fig.23 I2
Upper Limit Sensor
(2nd Paper Tray)
Upper Limit is detected. 1 (1045) Fig.23 F2
Upper Limit Sensor
(1st Paper Tray)
Upper Limit is detected. 1 (1045) Fig.11 G5
NP Sensor
(2nd Paper Tray)
Paper is not detected. 0 (1045) Fig.23 F2
NP Sensor
(1st Paper Tray)
Paper is not detected. 0 (1045) Fig.11 G5
005 Total Counter Detection Sensor Counter is not detected. 1 (331)
Polygon Motor Lock Signal Normal. 0 ---
Main Motor Lock Signal Normal. 0 (907)
Fuser Fan Lock Signal Normal. 0 (459)
Toner Waste Container
Detection Sensor
Toner Waste Container
is detected.
0 (1982)
Toner Waste Container Full
Detection Sensor
Toner Waste Container
is full.
1 (1982)
Toner Bottle Motor Rotation
Detection Sensor
Lock 0
---
006 Dual-Path Exit Guide Unit Exit
Sensor
Paper is detected. 0 (1045) Fig.15 G4
Paper Transport Unit Sensor 1 Paper is detected. 0 (1045) Fig.13 H3
ADU Sensor 1 Paper is detected. 0 (1045) Fig.15 I1
Inner Lower Exit Sensor Paper is detected. 0 (1045) Fig.10 G1
Registration Sensor
(2nd Paper Tray)
Paper is detected. 0 (1045) Fig.23 J2
Registration Sensor Paper is detected. 0 (1045) Fig.11 I3
007 Paper Transport Unit Detection
Sensor
Unit is connected. 0
---
Paper Transport Unit Door
Sensor
Door is open. 0 (1045) Fig.13 F4
Paper Transport Unit Sensor 4 Paper is detected. 0 (1045) Fig.13 H3
Paper Transport Unit Sensor 3 Paper is detected. 0 (1045) Fig.13 H3
Paper Transport Unit Sensor 2 Paper is detected. 0 (1045) Fig.13 H3
ADU Sensor 4 Paper is detected. 0 (1045) Fig.14 B7
ADU Sensor 3 Paper is detected. 0 (1045) Fig.14 I2
ADU Sensor 2 Paper is detected. 0 (1045) Fig.14 E2
F4 Mode (Input Check)
No. Function Condition
Message
Display
Remarks
(Ref.No.)
76543210