242
DP-8032/8025
2008Ver.1.2
This converted PFA tube Silicon Rubber Roller applies pressure to the Fuser Roller, assisting in bonding
the toner to the paper.
Cleaning Web Roller (1083)
The Cleaning Web Roller (1083) is installed in the Fuser Unit, which keeps cleaning the surface of the
Fuser Roller (1026).
When the Fuser Unit does not reach the specified temperature within a certain period of time, an Error code
is shown on the display, stopping the operation.
When the Thermistor Assembly (1041, 1042) is disconnected or the surface temperature of the Fuser Roller
(1026) is out of limit, an Error code is shown on the display, stopping the operation.
To Next Page
Loading...
