287
DP-8032/8025
2008Ver. 1.2
(15) Place the machine on top of the 3rd Paper Tray Unit
as illustrated.
Caution:
The machine weights approximately 181 lb (82 kg)
with the i-ADF pre-installed. To prevent injuries, use
the appropriate number of personnel and the proper
equipment to lift or move the machine.
(16) Remove 2 Silver Screws.
(17) Remove the Lower Rear Cover.
(18) Slide the 2nd Paper Tray out of the unit.
(19) Install the 4 Brackets, see Step (11).
(20) Secure the 4 Brackets with 8 Screws.
(21) Connect the Harness of the 3rd Paper Tray Unit to
CN772 on the CST2 PC Board of the 2nd Paper Tray
Unit.
Note:
Ensure not to insert the connector upside down,
as it may damage the machine's SPC or CST PC
board.
(22) Place the Harness into the clamp.
(23) Reinstall the Lower Rear Covers and the Paper
Trays.
(24) Level the machine with the 4 Adjusters as illustrated.
(25) Attach the Size Label(s) onto the 3rd/4th Paper
Tray(s).
To Next Page
Loading...
