291
DP-8032/8025
2008Ver. 1.2
(2) Remove 2 Silver Screws.
(3) Open the Jam Access Cover.
(4) Remove the Lower Rear Cover.
(5) Open the Front Cover of the Stand.
(6) Open the 2nd Paper Tray.
(7) Connect the machine to the Stand with 4 Joint
Brackets.
(8) Secure each Joint Bracket with 4 Screws.
(9) Close the 2nd Paper Tray and the Front Cover of the
Stand.
(10) Reinstall the Lower Rear Cover.
(11) Place the machine at a desired location and lower the
leveler on each corner to stabilize the machine.
(12) Plug the AC Power Cord into the wall outlet and turn
the Main Power Switch on the Back and the Power
Switch on the Left Side of the machine to the ON
position.
To Next Page
Loading...
